Library + Exhibition space

This is my last project in this subject which is hybrid: library + exhibition space .I had to design of the library and exhibition space that shall be based on the concept and derived from project 1 and to build on it.
Other than that I need express informed application of materials and technology in the design. Therefore, the design must include the use of the material researched from project 1, task 3, whether in the space or the fittings design.
My final presentation included an A4 square board of the detailed use of the material in design as progressed from the study model done in project 1, task 3 and also detailed drawing spaces has reception, reading area , resources storage ,office , exhibition space and a small cinema . It also included the drawing of 2 floor plans (1:100), 2 sections ( 1:50) , 2 elevations : front + side (1:50) , 1 exterior perspective , 2 interior perspectives , 1 detailed drawing (1:20). I also made a model (1:50) on A3 modelling board base 25cm thick and a material model board A4 square.below that are my 4 a1 board for presentation and model.

Below is my presentation board  :)

 And these are my model :)

Front Elevation

Side Elevation

Back Elevation

Ground Floor Plan

First Floor Plan

 These are my drawing of using autocad.

Ground Floor Plan

First Floor Plan

Section x-x

Section y-y

Front Elevation

Back Elevation

Side Elevation

Detailed Drawing

This is another relief model for wall decoration. It is sand texture.

I was presenting to lecturer :)

My final presentation in semester 3.

:)